Engineering ToolBox - Resources, Tools and Basic Information for Engineering and Design of Technical Applications!

ASTM D2513 - Thermoplastic Gas Pipes - Dimensions

Dimensions of thermoplastic pressure pipes.

Dimensions of thermoplastic gas pipes according ASTM D2513 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings:

CTS (Copper Tube Sized)

ASTM D2513 - Thermoplastic Gas Pipes - Dimensions - CTS (Copper Tube Sized)
Nominal Tubing Size (CTS) (in)	Outside Diameter (in)	Min. Wall Thickness (in)
1/4	0.375	0.062
3/8	0.500	0.062
1/2	0.625	0.062
1/2	0.625	0.090
1/2	0.625	0.104
3/4	0.875	0.062
3/4	0.875	0.077
3/4	0.875	0.090
1	1.125	0.062
1	1.125	0.090
1	1.125	0.099
1	1.125	0.101
1	1.125	0.121
1 1/4	1.375	0.062
1 1/4	1.375	0.090
1 1/4	1.375	0.121
1 3/4	1.875	0.062

1 inch = 25.4 mm

IPS (Iron Pipe Sized)

IPS (Iron Pipe Sized)

ASTM D2513 - Thermoplastic Gas Pipes - Dimensions - IPS (Iron Pipe Sized)
Nominal Pipe Size (IPS) (in)	SDR	Min. Wall Thickness (in)
1/2		0.062
1/2	11.0	0.076
1/2	9.33	0.090

3/4		0.090
3/4	11.0	0.095
3/4	Sch 40	0.113

1		0.90
1	13.5	0.097
1	11.0	0.120
1	9.9	0.133
1	9.33	0.140

1 1/4		0.090
1 1/4	17.0	0.098
1 1/4	13.5	0.123
1 1/4	Sch 40	0.140
1 1/4	11.0	0.151
1 1/4	10.0	0.166
1 1/4	9.33	0.178
1 1/4	6.0	0.277

1 1/2		0.090
1 1/2	17	0.112
1 1/2	13.5	0.141
1 1/2	Sch 40	0.145
1 1/2	11	0.173

2	21	0.113
2	17	0.140
2	Sch 40	0.154
2	13.5	0.176
2	11	0.216
2	9.33	0.255

2 1/2	21	0.137
2 1/2	17	0.169
2 1/2	13.5	0.213
2 1/2	11	0.261

3	21	0.167
3	17	0.206
3	Sch 40	0.216
3	13.5	0.259
3	11.5	0.304
3	11	0.318
3	9.33	0.375

3 1/2	21	0.190
3 1/2	17	0.236
3 1/2	13.5	0.296
3 1/2	11	0.363

4	21	0.214
4	19	0.237
4	17	0.265
4	13.5	0.333
4	11.5	0.391
4	11.0	0.409
4	9.33	0.482

5	21.6	0.258
5	21	0.265
5	17	0.327
5	13.5	0.412
5	11	0.506

6	32.5	0.204
6	26	0.255
6	23.7	0.280
6	21	0.315
6	17	0.390
6	13.5	0.491
6	11.5	0.576
6	11.0	0.602

8	32.5	0.265
8	26	0.332
8	21	0.411
8	17	0.507
8	13.5	0.639
8	11.5	0.750
8	11	0.784

10	32.5	0.331
10	26	0.413
10	21	0.512
10	17	0.632
10	13.5	0.796
10	11.5	0.935
10	11	0.977

12	32.5	0.392
12	26	0.490
12	21	0.607
12	17	0.750
12	13.5	0.944
12	11.5	1.109
12	11	1.159

Related Topics

Dimensions of Pipes and Tubes
Pipe, tube and fittings sizes and dimensions. Inside and outside diameters, weights and more.

Related Documents

ABS, PE, PVC, Fiberglass and Steel Pipes - Supports
Maximum distance between supports for ABS, PE, PVC, Fiberglass and Steel Pipes.
Air Ducts - Friction Loss Diagram
A major friction loss diagram for air ducts - Imperial units ranging 10 - 100 000 cfm.
ASTM D3035 - Polyethylene PE pipes - dimensions
Dimensions of PE pipes based on controlled outside diameter.
EN 12201 - Polyethylene (PE) Pipes for Water Supply, and for Drainage and Sewerage under Pressure - Dimensions
Dimensions of PE pipes according EN 12201.
ISO 4427 - PE Pipes for Water Supply - Dimensions
Polyethylene pipe dimensions according European Standards.
PE (PolyEthylene) Pipes - PN Pressure Grades
Polyethylene - PE - pipes and pressure classes.
PE (PolyEthylene) Pipes - Pressure Loss vs. Water Flow
Water flow in SDR pressure rated PE-pipes - pressure loss and velocities - Imperial and SI units.
PE (PolyEthylene) Pipes - Pressure Ratings vs. Size
Water pressure ratings for schedule 40 and schedule 80 Polyethylene plastic pipes
PE (PolyEthylene) Pipes - Pressure vs. Temperature Ratings
Polyethylene pipe temperature and maximum operating pressure.
PE - Polyethylene High Density Pipes - Weights
Weight of polyethylene pipes - metric units.
PE - Polyethylene High Density Water Supply Pipes - Properties
Nominal pipe size, outside diameter, wall thickness, weight and working pressure.
PE Polyethylene - Chemical Resistance
Chemical resistance of Polyethylene - PEH - to common products.
Piping Materials - Temperature Expansion Coefficients
Temperature expansion coefficients for materials used in pipes and tubes like aluminum, carbon steel, cast iron, PVC, HDPE and more.
Plastic Pipes - Maximum Operating Temperatures
Piping materials like ABS, PE, PVC, CPVC, PB, PP and SR and pressure and operating temperature limits.
SDR (Standard Dimension Ratio) and S Pipe Series
The Standard Dimension Ratio - SDR - is used to rate pressure pipes.
Thermoplastic Pipes - Strength Derating vs. Temperature
Increased temperatures derates the strength of thermoplastic piping materials.

Search

Search is the most efficient way to navigate the Engineering ToolBox.

Popular internal searches in the Engineering ToolBox

Engineering ToolBox - SketchUp Extension - Online 3D modeling!

Add standard and customized parametric components - like flange beams, lumbers, piping, stairs and more - to your Sketchup model with the Engineering ToolBox - SketchUp Extension - enabled for use with older versions of the amazing SketchUp Make and the newer "up to date" SketchUp Pro . Add the Engineering ToolBox extension to your SketchUp Make/Pro from the Extension Warehouse !

Translate this Page

Translate this page to Your Own Language .

About the Engineering ToolBox!

Privacy Policy

We don't collect information from our users. More about

the Engineering ToolBox Privacy Policy

We use a third-party to provide monetization technologies for our site. You can review their privacy and cookie policy here.

You can change your privacy settings by clicking the following button: .

Advertise in the ToolBox

If you want to promote your products or services in the Engineering ToolBox - please use Google Adwords. You can target the Engineering ToolBox by using AdWords Managed Placements.

Citation

This page can be cited as

The Engineering ToolBox (2018). ASTM D2513 - Thermoplastic Gas Pipes - Dimensions. [online] Available at: https://www.engineeringtoolbox.com/ASTM-D2513-thermoplastic-gas-pipes-d_2137.html [Accessed Day Month Year].

Modify the access date according your visit.